|
X-T01 paint remover is a new type of paint remover developed based on the principle of “efficiency, environment protection, convenience and zero corrosion to metals”. In case of practical operation, it only needs to pour it into the groove, and roll the steel drums to be coated on the surface of paint remover solution by one cycle quickly before taking it out (it is also applicable to apply the paint remover on the paint coat uniformly with brush). Normally, the amido baking paint as well as the most solid epoxy paint would become corrugated within approximate several seconds and several minutes respectively. After that, scrub the paint coat with dishcloth to remove the paint coat and reveal the lucent metallic surface. The metallic surface will not become rusty even if it is exposed for several days without treatment.
While in using, X-T01 paint remover will not bring about the problem concerning the environment friendly discharge as confronted by common paint removers (paint remover applied to the steel drum surface by means of brush or roll painting will be evaporated within several minutes), and thus has no corrosive action on metals. In this sense, application of X-T01 paint remover on the surface of steel drums for paint removing is convenient, and can guard against any damages owing to its high efficiency and consideration of environmental protection. Nevertheless, as X-T01 paint remover is a type of acid liquid, operators are requested to attach importance to safety protection, and wear acid and oil resistant rubber or plastic gloves in operation. To ensure the perfect paint removing effect, the paint remover must be mixed uniformly prior to application.
Before paint Remover swilled out the paint Remover after one second The space cleaned by the rag
|
